Leaking diaphragm... AGAIN.
11-15-2019, (Subject: Leaking diaphragm... AGAIN. ) 
Post: #19
RE: Leaking diaphragm... AGAIN.
(11-14-2019 )Chamberpains Wrote:  Pd6cas2, We may be talking about the same thing but just to be clear
This blow up is for a CM570


Part # 25 is what Evotrucker posted originally. I believe it's where I have the green arrow pointing in the picture below. Are you referring to where I have the Pink arrow as a filter also? That looks similar to a pressure reducer/regulator I have for my air turbo actuator. I've never pulled and IFSM on a CM570 apart. I'm going off of quickserve alone.
You are correct on both statements, yes there’s a screen filter ‘wire mesh filter inside that unit where the pink arrow is pointing.
replyreply


Messages In This Thread
RE: Leaking diaphragm... AGAIN. - Pd6cas2 - 11-15-2019



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.