Cm871 repeated same injector failure

[Inderjit]

(07-09-2016 )Rawze Wrote:  

(07-08-2016 )gearhead Wrote:  ...
e piston is full of carbon and raising the compression ratio up enough to mess it up
...

Actually, I have seen some with so much carbon packed on top of pistons before, that it was in fact evident that the compression very well could have gone up. it is not that far fetched.

Also, did he ever put old injectors into the number6? or just keep replacing injectors over and over in the same cylinder without moving the new injectors to a different location?

no he just replaced it with a another injector checked the fuel lines for air in them obviously no air in fuel lines