Replaced actuators.....now this...Need imput.

[preacherboy24]

After putting in reman injectors truck was running better but still seemed to have an intermittent miss. I decided to swap in some actuators I pulled apart, cleaned and checked a while back. Truck runs better but all of a sudden my boost is crazy. I can coast down a hill and be running 8lbs of boost. It never goes over 35lbs but when I kick on the Jake it goes to almost 20 and settles to 15. I know how this engine acts when you first crank it up after pulling actuators and I am thinking something happened to my turbo. Again....I can coast (no fuel to the engine) and be running 8lbs of boost. I have a mechanical gauge and it matches what my computer is saying. I have a cm870 and will prolly just go with an HX60 and reprogram the VG out of it since the actuator setup on an 870 is junk in my opinion.