Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / International Trucks Related Help / Rear axle is soaked, need help...

new reply
Rear axle is soaked, need help...
12-07-2019, (Subject: Rear axle is soaked, need help... ) 
Post: #17
Contributing V.I.P.Brock Offline
The Forum Idiot  (1117 Likes)  ****

 		Posts: 1,290
Joined: Nov 2015
Thanks: 1261
Given 1117 thank(s) in 532 post(s)
RE: Rear axle is soaked, need help...
Just had to put a new input shaft seal on the front diff yesterday, I just got a shop to do it as I couldn't be bothered. Was my own fault for letting myself run with a wire out steady bearing for so long.... so we replaced that too!

How is your slip joint on your interaxle driveshaft? Any play?

User's Signature: I'm no mechanic, I'm just a guy that breaks down enough to know a bit.
Return to Top | find
replyreply
 Thanks given by: Rawze
new reply


Messages In This Thread
RE: Rear axle is soaked, need help... - Unilevers - 12-06-2019,
RE: Rear axle is soaked, need help... - Brock - 12-07-2019



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication