Rear axle is soaked, need help...

[Waterloo]

(12-07-2019 )Brock Wrote:  Just had to put a new input shaft seal on the front diff yesterday, I just got a shop to do it as I couldn't be bothered. Was my own fault for letting myself run with a wire out steady bearing for so long.... so we replaced that too!

How is your slip joint on your interaxle driveshaft? Any play?

I went under there with a bar and found nothing moved, side to side, up and down, as far as in and out, won't know until I get her out. Driveline was rebuilt a few years ago, so I'm not expecting any surprises. Any idea what size that nut is on there? I have some tools, but that could be an issue.