| Cm2250 overhead set |
| 12-11-2019, (Subject: Cm2250 overhead set ) Post: #1 | |||
| |||
| Cm2250 overhead set I have a 2011 cm2250 and getting ready to do overhead set soon. I seen Simon's video on YouTube and he checks the engine brake with a dial indicator after he adjusted the lash. I looked up the procedure on onsite for my engine and it doesnt say to do that for my year engine. He has a cm2350. Do I have to check it with dial indicator as well? Also I dont have a in lbs torque wrench for engine brake nut so 177 in lbs equals 14.75 ft lbs should I be fine? Thanks guys | |||
| « Next Oldest | Next Newest » |
| Messages In This Thread |
Cm2250 overhead set - jimeneztrans84 - 12-11-2019 RE: Cm2250 overhead set - Waterloo - 12-12-2019, RE: Cm2250 overhead set - JMBT - 12-12-2019, RE: Cm2250 overhead set - Waterloo - 12-12-2019, RE: Cm2250 overhead set - JMBT - 12-12-2019, RE: Cm2250 overhead set - Rawze - 12-13-2019, RE: Cm2250 overhead set - jimeneztrans84 - 12-12-2019, RE: Cm2250 overhead set - Hammerhead - 12-16-2019, RE: Cm2250 overhead set - JMBT - 12-12-2019, RE: Cm2250 overhead set - jimeneztrans84 - 12-16-2019, RE: Cm2250 overhead set - Lonestar10 - 12-17-2019, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.