Cm2250 overhead set

Rawze.com: Rawze's ISX Technical Discussion and more

New: Rawze's amazon Page

A big THANK YOU For those who have recently Contributed towards keeping the lights on around here. It helps keep the website costs at bay and goes towards helping others with their trucks.

I want to personally thank everyone who has donated to the forum recently. It helps pay for the $790/month internet bill that the forum consumes. - Thank you again.

YOU NEED AN INVITATION CODE TO Register! -- To obtain an invitation code, please e-mail [email protected] with a reason why you want to join. This keeps the spammers out and our forum clean.

Current time: 11-27-2024, | ShoutboxHello There, Guest! (Login — Register)

Threaded Mode | Linear Mode

Cm2250 overhead set

12-12-2019, (Subject: Cm2250 overhead set )

Post: #3

JMBT

Offline

HMR-Contrinbuting V.I.P. (577 Likes)

Posts: 833
Joined: Jul 2016

Thanks: 1540
Given 577 thank(s) in 313 post(s)

RE: Cm2250 overhead set

The dial caliper is the best way to get a measurement on the jake detent positions, and therefor head wear. I use it every time I do an overhead. I bought a cheap one on Amazon about $30 if I remember right. If you don’t have a dial you will only be able to see if you still have detent not how much.

I agree with Waterloo on the torque wrench, the ft/lb will work but if you are going to be doing your own overheads you might as well buy a small in/ft as well.

User's Signature: Anti-seize EVERYTHING, Except injectors...Use Petroleum Jelly!!!

Return to Top | find

Thanks given by:

« Next Oldest | Next Newest »

Messages In This Thread

Cm2250 overhead set - jimeneztrans84 - 12-11-2019,

RE: Cm2250 overhead set - Waterloo - 12-12-2019,

RE: Cm2250 overhead set - JMBT - 12-12-2019

RE: Cm2250 overhead set - Waterloo - 12-12-2019,

RE: Cm2250 overhead set - JMBT - 12-12-2019,

RE: Cm2250 overhead set - Rawze - 12-13-2019,

RE: Cm2250 overhead set - jimeneztrans84 - 12-12-2019,

RE: Cm2250 overhead set - Hammerhead - 12-16-2019,

RE: Cm2250 overhead set - JMBT - 12-12-2019,

RE: Cm2250 overhead set - jimeneztrans84 - 12-16-2019,

RE: Cm2250 overhead set - Lonestar10 - 12-17-2019,

NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.

Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication

Powered By MyBB, © 2002-2024 MyBB Group | Theme by Laughing Inc - Web Design