| Cm2250 overhead set |
| 12-12-2019, (Subject: Cm2250 overhead set ) Post: #6 | |||
| |||
| RE: Cm2250 overhead set Here's a link. If I buy that 1/4 inch torque wrench and put an adapter from 1/4 to 3/8 for crows foot am I ok? Do I lose any torque going that route or buy a 1/4 crows foot I believe 13mm for Jake brake? https://youtu.be/_tWI5pipZoA | |||
| « Next Oldest | Next Newest » |
| Messages In This Thread |
Cm2250 overhead set - jimeneztrans84 - 12-11-2019, RE: Cm2250 overhead set - Waterloo - 12-12-2019, RE: Cm2250 overhead set - JMBT - 12-12-2019, RE: Cm2250 overhead set - Waterloo - 12-12-2019, RE: Cm2250 overhead set - JMBT - 12-12-2019, RE: Cm2250 overhead set - Rawze - 12-13-2019, RE: Cm2250 overhead set - jimeneztrans84 - 12-12-2019 RE: Cm2250 overhead set - Hammerhead - 12-16-2019, RE: Cm2250 overhead set - JMBT - 12-12-2019, RE: Cm2250 overhead set - jimeneztrans84 - 12-16-2019, RE: Cm2250 overhead set - Lonestar10 - 12-17-2019, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.