Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / Ask Your question... / 2010 Peterbilt 387 HELP

new reply
2010 Peterbilt 387 HELP
12-17-2019, (Subject: 2010 Peterbilt 387 HELP ) 
Post: #10
Rawze Offline
Forum Reject  (14146 Likes)  *******

 		Posts: 11,348
Joined: Jun 2013
Thanks: 6014
Given 14146 thank(s) in 6232 post(s)
RE: 2010 Peterbilt 387 HELP
If those are origional miles then that engine is done .... DO NOT DRIVE IT!!!! --- IT IS A TICKING TIMB BOMB WAITING TO SEND A PISTON THROUGHT THE BLOCK WITH ZERO WARNING!!! --- The wrist pin bushings are done for at that mileage if they are still original and especially so if the rod/mains were not done at 800k like they were supposed to be.

START BY having it inframed!!!!! --- Either take it to Mr. hags so that it can be done right,.. or do it yourself and follow the recommendations of this forum on how to do it properly + make it stronger, more reliable, or you will regret the hell out of it!

User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
Return to Top | find
replyreply
 Thanks given by: Waterloo
new reply


Messages In This Thread
RE: 2010 Peterbilt 387 HELP - Rawze - 12-17-2019



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication