Vibration

[2dlb]

(12-18-2019 )Justchilling247 Wrote:  

(12-17-2019 )Magard Wrote:  I have the same cpl. It’s probably a combination of u joints driveline angles and clutch input shaft being whore. I had the same touble. After new drivlines and clutch and proper ride hight and driveline angles it went away.

The clutch is new, so I'll have the driveline and ride height checked out. Thanks for the input.

If the clutch was just changed check to make sure that the yokes are all in phase and that all the joints are properly seated in the yokes. seen lots of guys through it back together and a piece of dirt offset a joint.