X15 noise and lack of power on a hard pull.
12-25-2019, (Subject: X15 noise and lack of power on a hard pull. ) 
Post: #13
RE: X15 noise and lack of power on a hard pull.
(12-17-2019 )marek4792 Wrote:  Not sure what your specs are but it's pretty much known here that you do not lug a Cummins below 1300 under any circumstance, have you ran an overhead yet you very well could have a bad camshaft already yes it's very common issue, also its about that time to rebuild that fuel pump they still fail like the older isx's but will not contaminate the oil passages. Have you done an egr tuneup yet?


Then why does Cummins list specs on there own website like this on the X15?

X15 450 SA
450 (335)
1550/1750 (2101/2372) @ 1000

Every X15 listed has its rated HP and Torqu at 1000 RPM. I would not think they would give the engine rating (the only engine rating) at an RPM that would damage the engine. That would be financial suicide.


Attached File(s)Image(s)
./uploads/201912/post_4351_1577247903_af83e0b9effa059d4af661d3e2805bf0.png
replyreply


Messages In This Thread
RE: X15 noise and lack of power on a hard pull. - Jrloar - 12-25-2019



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.