Did my new turbo take a dump?

[Waterloo]

One other thing... When I took the metal 90* elbow off at the turbo intake, I found the o ring was missing a good sized piece. This would explain how the oil escaped and misted on the turbo intake tube from the CAC... There was no way this o-ring was sealing properly. I went to Cummins Quickserve, and went to the Turbocharger - Compressor Seal Oil Leak section... In the diagnostic tree, #2 was this, "Boost leak or past boost leaks including hose "blow-offs" causing an oil leak, or slobber. Well, back to my o ring, if this can cause slobber, I may have solved my problem last night when I fixed this. Finger's crossed.

I also found that a clogged air filter will cause slobber, as well as a clogged or crushed turbo charger drain line. I will inspect these also. Learning allot here...