|     Bunk heat electric apu    |  
|    01-10-2020, (Subject: Bunk heat electric apu )   Post: #2   |  |||
 
  |  |||
|  RE: Bunk heat electric apu    try to start it a few times. but it probly needs the screen by the glowplug replaced also check for a fuel filter on the suction side of the pump where a nut connects to it. if thats not it then either needs burn chamber or diagnosed via a computer hookup.   User's Signature: 2010 Lonestar - CM871 - 13sp - 3.70s, 2016 T680 - cm2350 - 13sp - 3.36s - skateboarder  |  |||
|    « Next Oldest | Next Newest »    |  
| Messages In This Thread | 
Bunk heat electric apu - Magard - 01-10-2020,  RE: Bunk heat electric apu - Lonestar10 - 01-10-2020  RE: Bunk heat electric apu - Rawze - 01-11-2020,  RE: Bunk heat electric apu - Magard - 01-11-2020,  RE: Bunk heat electric apu - Magard - 01-13-2020,  RE: Bunk heat electric apu - Lonestar10 - 01-13-2020,  RE: Bunk heat electric apu - Magard - 01-13-2020,  RE: Bunk heat electric apu - Lonestar10 - 01-13-2020,  RE: Bunk heat electric apu - Magard - 01-13-2020,   | 
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.

 
