Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / ISX Related Help / New davco questions

new reply
New davco questions
01-16-2020, (Subject: New davco questions ) 
Post: #1
Lonestar10 Offline
HMR-Contrinbuting V.I.P.  (1213 Likes)  *****

 		Posts: 1,873
Joined: Oct 2018
Thanks: 13
Given 1213 thank(s) in 780 post(s)
New davco questions
Tomorrow I'm putting on a new davco unit along with new fuel lines the new davco has a fuel heater 12 volt and a water in fuel sensor I'm just wondering does my engine harness have an unused plug for a wif sensor or does it need to be pinned into the ECM or truck as my truck previously didn't have a water in fuel sensor

User's Signature: 2010 Lonestar - CM871 - 13sp - 3.70s, 2016 T680 - cm2350 - 13sp - 3.36s - skateboarder
Return to Top | find
replyreply
new reply


Messages In This Thread
New davco questions - Lonestar10 - 01-16-2020
RE: New davco questions - JimT - 01-16-2020,
RE: New davco questions - JimT - 01-16-2020,
RE: New davco questions - JimT - 01-16-2020,
RE: New davco questions - JimT - 01-16-2020,
RE: New davco questions - JimT - 01-16-2020,
RE: New davco questions - JimT - 01-17-2020,
RE: New davco questions - JimT - 01-17-2020,
RE: New davco questions - JimT - 01-17-2020,
RE: New davco questions - JimT - 01-18-2020,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication