Clay in the carrier...

[JimT]

(01-17-2020 )Riderivas45 Wrote:  Hey JimT. When I stalled my gauges I pulled power and the headlight switch from another existing gauge it had space for another jumper harness so I tapped into there. And i took ignition from my radio and i grounded it on a separate screw.

Good info, thanks. I now have a right weigh gauge coming in a week and I'll be adding more gauges in the future, so i might just look into adding something to the fuse block that can support everything. Hopefully keep it clean, I hate having lots of splices that could cause problems down the line.