ProStar CM871 Turbo (Before Milk2)

[D_Y_F_B_A_E]

I got the DPF off today, took it home and I'll do some karate on it later tonight. I just want to make sure I do it according to procedure. The DOC doesn't come off, so I suppose I will have to do that part on the truckstop lot.

The only fault code that I had, was due to the DOC. I ran the After-treatment Maintenance Reset, and cleared out all the fault codes with Insite. I will use the milk overlay tomorrow, to see if the truck even runs.

Then I will continue with cleaning out the maniflold and appropriate sensors.
I'm going to buy some better serious tools today.