| ISX Counterbore Cut |
| 02-03-2020, (Subject: ISX Counterbore Cut ) Post: #2 | |||
| |||
| RE: ISX Counterbore Cut There is only one way to build an ISX to make it last a million miles. there is no compromises for this, and any shortcuts, or not doing it this specific way, it will not stay together... First of all,,.. ONLY EVER USE A CERTIFIED OEM BRAND NEW HEAD -- NOT REMAN, NOT FROM ANY SHOP THAT SELLS OR MACHINES A HEAD--- IT WILL NOT LAST, I DON;T CARE HOW GOOD THEY CLAIM THEY CAN DO IT!!! As far as the head torque, and liner height... http://rawze.com/forums/showthread.php?t...8#pid46498 and... ONLY CERTIFIED OEM COMPONENTS INSIDE THAT ENGINE, PISTONS, LINERS, ETC!!!! -- ANYTHING ELSE AND THE ENGINE WILL NOT LAST, WILL ONLY RESULT IN IT COMING APART AGAIN LATER AND SOMEONE CURSING ABOUT HOW A S$IT JOB WAS DONE ON IT!!!! User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!. | |||
|
| « Next Oldest | Next Newest » |
| Messages In This Thread |
ISX Counterbore Cut - Ivanprki - 02-03-2020, RE: ISX Counterbore Cut - Rawze - 02-03-2020 |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.