| Kenworth t800, no bump idle |
| 07-19-2016, (Subject: Kenworth t800, no bump idle ) Post: #1 | |||
| |||
 Kenworth t800, no bump idle Already tried the clock spring since we had one, and swapped out the smart wheel master control module with no luck. Also tried the cecu from another unit. The jakes work on the smart wheel... But no bump idle. Any ideas where else to look? I made sure the clutch pedal is fully up to the top, as well as brake pedal. | |||
| « Next Oldest | Next Newest » |
| Messages In This Thread |
Kenworth t800, no bump idle - joed2323 - 07-19-2016 RE: Kenworth t800, no bump idle - stevesparts - 07-19-2016, RE: Kenworth t800, no bump idle - joed2323 - 07-19-2016, RE: Kenworth t800, no bump idle - joed2323 - 07-20-2016, RE: Kenworth t800, no bump idle - Rawze - 07-21-2016, RE: Kenworth t800, no bump idle - kryten - 07-20-2016, RE: Kenworth t800, no bump idle - schISM - 07-20-2016, RE: Kenworth t800, no bump idle - joed2323 - 07-21-2016, RE: Kenworth t800, no bump idle - Rawze - 07-21-2016, RE: Kenworth t800, no bump idle - schISM - 07-21-2016, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.