cm2250 rough idle
02-13-2020, (Subject: cm2250 rough idle ) 
Post: #3
RE: cm2250 rough idle
(02-13-2020 )Rawze Wrote:  will it pass this injector leak test?





how many psi does it loose in one minute?.

0 psi loss. Baseline was like 29,890 or something. When I shut the engine off it jumped to 30,500psi or so, then ended the test just over 31,000psi. It continued to hold that pressure until the engine was restarted about 5 minutes later.

Edit: this test was performed less than a week prior to the first occurrence. I'm currently heading to get fingerprinted for cdl/hazmat renewal so I can try it again later if needed.


User's Signature: "...And as we wind on down the road, Our Shadows taller than our Soul..."
replyreply


Messages In This Thread
cm2250 rough idle - JimT - 02-13-2020,
RE: cm2250 rough idle - Rawze - 02-13-2020,
RE: cm2250 rough idle - JimT - 02-13-2020
RE: cm2250 rough idle - JimT - 02-21-2020,
RE: cm2250 rough idle - Rawze - 02-13-2020,
RE: cm2250 rough idle - JimT - 02-13-2020,
RE: cm2250 rough idle - Rawze - 02-13-2020,
RE: cm2250 rough idle - JimT - 02-13-2020,
RE: cm2250 rough idle - JimT - 02-21-2020,
RE: cm2250 rough idle - Rawze - 02-21-2020,
RE: cm2250 rough idle - JimT - 02-21-2020,
RE: cm2250 rough idle - JimT - 02-21-2020,
RE: cm2250 rough idle - JimT - 02-21-2020,
RE: cm2250 rough idle - Rawze - 02-21-2020,
RE: cm2250 rough idle - JimT - 02-22-2020,
RE: cm2250 rough idle - Rawze - 02-22-2020,
RE: cm2250 rough idle - JimT - 02-22-2020,
RE: cm2250 rough idle - JimT - 02-22-2020,
RE: cm2250 rough idle - hhow55 - 02-22-2020,
RE: cm2250 rough idle - JimT - 02-22-2020,
RE: cm2250 rough idle - JimT - 02-29-2020,
RE: cm2250 rough idle - hhow55 - 02-29-2020,
RE: cm2250 rough idle - Rawze - 02-23-2020,
RE: cm2250 rough idle - JimT - 02-23-2020,
RE: cm2250 rough idle - JMBT - 02-23-2020,
RE: cm2250 rough idle - JimT - 02-23-2020,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.