cm2250 rough idle
02-13-2020, (Subject: cm2250 rough idle ) 
Post: #7
RE: cm2250 rough idle
I'm considering removal, but I figured I'd wait until a good reason presented itself before doing that.

As for the EGR cooler, it was replaced at some point in the past. Based on logged data in the ECM I'm estimating it was done somewhere between 200,000-300,000 miles. Though I can't be sure.

As of late December when I replaced the EGR valve it was dry inside. There was some soot buildup, but not extreme. I did not remove the cooler or attempt to clean it in any way.


User's Signature: "...And as we wind on down the road, Our Shadows taller than our Soul..."
replyreply


Messages In This Thread
cm2250 rough idle - JimT - 02-13-2020,
RE: cm2250 rough idle - Rawze - 02-13-2020,
RE: cm2250 rough idle - JimT - 02-13-2020,
RE: cm2250 rough idle - JimT - 02-21-2020,
RE: cm2250 rough idle - Rawze - 02-13-2020,
RE: cm2250 rough idle - JimT - 02-13-2020,
RE: cm2250 rough idle - Rawze - 02-13-2020,
RE: cm2250 rough idle - JimT - 02-13-2020
RE: cm2250 rough idle - JimT - 02-21-2020,
RE: cm2250 rough idle - Rawze - 02-21-2020,
RE: cm2250 rough idle - JimT - 02-21-2020,
RE: cm2250 rough idle - JimT - 02-21-2020,
RE: cm2250 rough idle - JimT - 02-21-2020,
RE: cm2250 rough idle - Rawze - 02-21-2020,
RE: cm2250 rough idle - JimT - 02-22-2020,
RE: cm2250 rough idle - Rawze - 02-22-2020,
RE: cm2250 rough idle - JimT - 02-22-2020,
RE: cm2250 rough idle - JimT - 02-22-2020,
RE: cm2250 rough idle - hhow55 - 02-22-2020,
RE: cm2250 rough idle - JimT - 02-22-2020,
RE: cm2250 rough idle - JimT - 02-29-2020,
RE: cm2250 rough idle - hhow55 - 02-29-2020,
RE: cm2250 rough idle - Rawze - 02-23-2020,
RE: cm2250 rough idle - JimT - 02-23-2020,
RE: cm2250 rough idle - JMBT - 02-23-2020,
RE: cm2250 rough idle - JimT - 02-23-2020,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.