High idle settings?

[sprayerman]

(02-20-2020 )marek4792 Wrote:  

(02-20-2020 )sprayerman Wrote:  

(02-20-2020 )Mr Hagg Wrote:  Look and see if PTO is disable. if so need to enable it and expand it and set max rpms to like 1650 or so then what ever you want set or resume to be the last 2 in that area

Ok... I'll check that. This ecm actually has several parameters that are labeled read only.

alot of the parameters like for example the road speed governor is "read only" but yet fully adjustable but if you're changing something and it's not letting you then that's another story..

You guys were exactly right, I finally got a chance to hook back up and the parameters labeled read only were in fact adjustable. Also I got my high idle settings changed via pto like you suggested. Thank you!

The pic is what I was seeing must of not even tried changing them after I saw that.