Truck won’t start
02-23-2020, (Subject: Truck won’t start ) 
Post: #19
RE: Truck won’t start
lol, i take it cranks to mean it spins with the starter....it doesn't spin over to mean no fire...take a multimeter and unplug the connector at the lift pump. check for battery voltage. If you have 12+ volts there your lift pump is shot. No voltage there then you need to find the in line fuse between the pump and ECM. Mine popped the fuse and also the new one when I replaced it. Turned out to be a bad pump. The fuse will be all by itself, usually taped to the harness. They wrap it up really well and its hard to see...it's just a 10 amp blade fuse with a plastic cover over it...
replyreply
 Thanks given by: JimT , JMBT


Messages In This Thread
Truck won’t start - Ballerxl - 02-23-2020,
RE: Truck won’t start - JimT - 02-23-2020,
RE: Truck won’t start - JimT - 02-23-2020,
RE: Truck won’t start - Nilao - 02-23-2020
RE: Truck won’t start - JimT - 02-23-2020,
RE: Truck won’t start - JimT - 02-23-2020,
RE: Truck won’t start - JimT - 02-23-2020,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.