Truck won’t start
02-23-2020, (Subject: Truck won’t start ) 
Post: #26
RE: Truck won’t start
Not sure if it's exactly the same as your engine, but my cm2250 ECM wiring harness diagram shows the lift pump and both NOx sensors sharing the same neutral/ground wire back to the battery. You could have a ground issue in this circuit.


User's Signature: "...And as we wind on down the road, Our Shadows taller than our Soul..."
replyreply
 Thanks given by: hhow55


Messages In This Thread
Truck won’t start - Ballerxl - 02-23-2020,
RE: Truck won’t start - JimT - 02-23-2020,
RE: Truck won’t start - JimT - 02-23-2020,
RE: Truck won’t start - JimT - 02-23-2020,
RE: Truck won’t start - JimT - 02-23-2020
RE: Truck won’t start - JimT - 02-23-2020,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.