Truck won’t start
02-23-2020, (Subject: Truck won’t start ) 
Post: #32
RE: Truck won’t start
The easiest way to tell if the ecm is not completely dead is to watch the oil pressure gauge while cranking. After about 15-20 seconds of cranking, it should read a few psi. -- That is, unless you actually have no oil pressure, and the engine is in a shut down mode (cummins insite should tell you this though).


User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
replyreply


Messages In This Thread
Truck won’t start - Ballerxl - 02-23-2020,
RE: Truck won’t start - JimT - 02-23-2020,
RE: Truck won’t start - JimT - 02-23-2020,
RE: Truck won’t start - JimT - 02-23-2020,
RE: Truck won’t start - JimT - 02-23-2020,
RE: Truck won’t start - JimT - 02-23-2020,
RE: Truck won’t start - Rawze - 02-23-2020



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.