Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / ISX Related Help / Moisture under the oil cap... milkshake

new reply
Moisture under the oil cap... milkshake
02-24-2020, (Subject: Moisture under the oil cap... milkshake ) 
Post: #20
Waterloo Offline
HMR-Contrinbuting V.I.P.  (4129 Likes)  *****

 		Posts: 4,617
Joined: Oct 2014
Thanks: 5334
Given 4129 thank(s) in 2094 post(s)
RE: Moisture under the oil cap... milkshake
Make sure they install a new head, not a reman, or the one you are removing, NEW, OEM NEW! Odds are an in frame is in order. The block needs to be machined, the ledge the liner(s) sit upon, liner protrusion of .0014 of an inch. You don't do that, and make sure it is done to spec, you will be back in this same boat in a matter of months. I was, it is not fun, and you will pay double. If you want a nice truck, mine is for sale.
Return to Top | find
replyreply
new reply


Messages In This Thread
RE: Moisture under the oil cap... milkshake - Waterloo - 02-24-2020



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication