Low turbo speed X15

[tree98]

Well this problem has returned. Quickserve says one of the things that can cause this is " operating the engine at idle or high idle while stationary will not create enough load to maintain boost pressure at 1.19 times ambient pressure for 30 consecutive seconds" Is this saying there is a diagnostic in the program looking for at least 1.19 times ambient pressure and its possible it won't reach that if its idling for 30 seconds or longer while stationary?? This is a log truck with a p.t.o operated log loader, so when you get to where your going to load or unload, you engage the p.t.o. and hit the cruise to bump the rpm up to 1175 so you can run the loader. So that would meet the criteria for high idle while stationary. I'm wondering if this is even a real problem or just something stupid in the program?? Any ideas?