2350 fuel rail decay

[Rawze]

(03-01-2020 )tree98 Wrote:  When you say feed tubes are you talking about the steel lines that go to each injector from the rail? Wouldn't you see a bunch of fuel leaking out if they don't seal? I haven't had to take mine off yet so it's new to me, but I've also heard Rawze say they are one time use.

no, when the crush-fit ends get leaky, they leak into the return circuit.. not to the outside. Also if an injector is leaky, it can either leak to the return circuit, or into the cylinder. depends on the failure.