| Kenworth t800, no bump idle |
| 07-20-2016, (Subject: Kenworth t800, no bump idle ) Post: #5 | |||
| |||
| RE: Kenworth t800, no bump idle Did it work before? I know with my Volvo it is an ECM setting to both enable/disable the high idle and also what the max RPM will be. I think I had the shop set the max RPM on mine at 1000 and when I bump the switch there is a 50 rpm change. User's Signature: Too young to quit........Too old to change. | |||
| « Next Oldest | Next Newest » |
| Messages In This Thread |
Kenworth t800, no bump idle - joed2323 - 07-19-2016, RE: Kenworth t800, no bump idle - stevesparts - 07-19-2016, RE: Kenworth t800, no bump idle - joed2323 - 07-19-2016, RE: Kenworth t800, no bump idle - joed2323 - 07-20-2016, RE: Kenworth t800, no bump idle - Rawze - 07-21-2016, RE: Kenworth t800, no bump idle - kryten - 07-20-2016 RE: Kenworth t800, no bump idle - schISM - 07-20-2016, RE: Kenworth t800, no bump idle - joed2323 - 07-21-2016, RE: Kenworth t800, no bump idle - Rawze - 07-21-2016, RE: Kenworth t800, no bump idle - schISM - 07-21-2016, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.