Ddec6 turbo speed code |
03-04-2020, (Subject: Ddec6 turbo speed code ) Post: #15 | |||
| |||
RE: Ddec6 turbo speed code (03-04-2020 )trucklogger2 Wrote: We found that the actuator was getting a short somewhere between ecm and actuator. Right now there is a new harness installed between the two and it is running normal after a 20 minute test drive. A burnt smell from the actuator was present and it looked like this... looks like it got hot (likely from bad-deletes-r-us.com) and the grease inside it ran out / got cooked. - keep running it like that (and without opening it up and re-greasing it internally), and you will be replacing it soon. that thing got a pyro and boost gauge on it? What are they getting up to in a hard pull? User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!. | |||
« Next Oldest | Next Newest » |
Messages In This Thread |
Ddec6 turbo speed code - trucklogger2 - 01-12-2020, RE: Ddec6 turbo speed code - tree98 - 01-12-2020, RE: Ddec6 turbo speed code - trucklogger2 - 01-12-2020, RE: Ddec6 turbo speed code - Waterloo - 01-12-2020, RE: Ddec6 turbo speed code - trucklogger2 - 01-13-2020, RE: Ddec6 turbo speed code - Brock - 01-12-2020, RE: Ddec6 turbo speed code - tree98 - 01-13-2020, RE: Ddec6 turbo speed code - trucklogger2 - 01-13-2020, RE: Ddec6 turbo speed code - Mr Hagg - 01-13-2020, RE: Ddec6 turbo speed code - trucklogger2 - 01-13-2020, RE: Ddec6 turbo speed code - Rawze - 01-14-2020, RE: Ddec6 turbo speed code - trucklogger2 - 03-01-2020, RE: Ddec6 turbo speed code - Rawze - 03-02-2020, RE: Ddec6 turbo speed code - trucklogger2 - 03-04-2020, RE: Ddec6 turbo speed code - Rawze - 03-04-2020 |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.