New Cummins owner, intro and inquiry

[preacherboy24]

I would consider rods and mains. After watching Rawzes video and seeing the condition of his liners I borescoped mine. I still have cross hatching in mine. My rods and mains were in need of replacement after 800k. If your not burning oil do the mandate removal with a little tweak with the fuel and turbo tables.....Unililevers can do that over the internet. I would consider doing the bubble test with the actuator block to see how the injectors are doing too. Lookup Rawzes video on that. I get no less than 6mpg with my truck loaded. You need to kill the gears in that thing.....weight+mountains does not equal 355...lol. I am seriously considering removing my VG on my ISX because its air actuated and the three main components on that are more expensive than one brand new HX55. I have been hearing that you loose jake power but you dont loose on performance. The option is out there and I will keep the forum posted on the progress. You have a good engine but you need to tilt the hood and eat lunch with it.....its a crybaby.