X15 questions

[smorgan87]

(03-13-2020 )Lonestar10 Wrote:  If you were looking at a new truck would you get the higher compression performance series or the lower compression efficiency series if you were gona see if uni could put a legal efficiency tune on with say a 500 1750-1850 rating. Which one would achieve the better efficiency with the uni magic.



Spose I'm more or less putting this question towards Unilever if he sees it.

I would go with lower static compression. Less stress on heads, gaskets and liners. As i understand it with lower compression u can run a little higher advance and a bit more boost.