X15 questions |
03-14-2020, (Subject: X15 questions ) Post: #16 | |||
| |||
RE: X15 questions From what I was told the efficiency series pistons are lower compression and is actually better for power, especially if you're cramming 600+hp into a motor. I'm almost wondering when overhaul time comes if there would be any benefit using 2250/2350 pistons to increase efficiency and power without throwing everything out of whack or putting a stupid amount of power at it to gain what may have been lost due to higher compression. | |||
« Next Oldest | Next Newest » |
Messages In This Thread |
X15 questions - Lonestar10 - 03-13-2020, RE: X15 questions - smorgan87 - 03-13-2020, RE: X15 questions - tree98 - 03-13-2020, RE: X15 questions - Lonestar10 - 03-13-2020, RE: X15 questions - Magard - 03-13-2020, RE: X15 questions - Ben50291 - 03-13-2020, RE: X15 questions - Rawze - 03-14-2020, RE: X15 questions - Magard - 03-14-2020, RE: X15 questions - 5022 - 03-14-2020, RE: X15 questions - tree98 - 03-14-2020, RE: X15 questions - 5022 - 03-14-2020, RE: X15 questions - 5022 - 03-14-2020, RE: X15 questions - Rawze - 03-15-2020, RE: X15 questions - tree98 - 03-14-2020, RE: X15 questions - marek4792 - 03-14-2020, RE: X15 questions - tree98 - 03-14-2020, RE: X15 questions - marek4792 - 03-14-2020 RE: X15 questions - tree98 - 03-14-2020, RE: X15 questions - marek4792 - 03-14-2020, RE: X15 questions - Lonestar10 - 03-14-2020, RE: X15 questions - marek4792 - 03-14-2020, RE: X15 questions - Running rough - 03-14-2020, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.