Truck won't turn left |
07-21-2016, (Subject: Truck won't turn left ) Post: #10 | |||
| |||
RE: Truck won't turn left (07-21-2016 )joed2323 Wrote: Nobody has messed with the alignment of these trucks Check that shaft u joints are accepting grease and the needle bearings aren't rusted or broken, that means pulling the shaft and cups to inspect. If you do that replacing them isn't a bad idea. It could also be another u joint or knuckle in the steering column binding, it does happen. You will hear a clicking sound while turning the wheel. Summitracing.com , small trans cooler and some high quality 2 wire teflon lines, braided stainless. A line collapsing is something I would be sure wasn't happening before adding a cooler. Is it possible the fluid is contaminated? Other than that it may be time to change the steering box. User's Signature: 2010 386 Pete CM871, 13 spd. 3.55 | |||
« Next Oldest | Next Newest » |
Messages In This Thread |
Truck won't turn left - joed2323 - 07-20-2016, RE: Truck won't turn left - Waterloo - 07-20-2016, RE: Truck won't turn left - Wiseman - 07-20-2016, RE: Truck won't turn left - Waterloo - 07-20-2016, RE: Truck won't turn left - joed2323 - 07-20-2016, RE: Truck won't turn left - Rawze - 07-20-2016, RE: Truck won't turn left - Hedley - 07-20-2016, RE: Truck won't turn left - joed2323 - 07-21-2016, RE: Truck won't turn left - in2trux - 07-21-2016 RE: Truck won't turn left - Nilao - 07-21-2016, RE: Truck won't turn left - joed2323 - 07-21-2016, RE: Truck won't turn left - overshot - 07-21-2016, RE: Truck won't turn left - Billdozer2 - 07-23-2016, RE: Truck won't turn left - gatow900 - 07-24-2016, RE: Truck won't turn left - Hammerhead - 07-24-2016, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.