Oil priming after internal engine work |
03-23-2020, (Subject: Oil priming after internal engine work ) Post: #11 | |||
| |||
RE: Oil priming after internal engine work I've used a hand pump to prime an N14 enough to register 1 or 2 psi at the rifle. No reason why it wouldn't work on an ISX. | |||
|
« Next Oldest | Next Newest » |
Messages In This Thread |
Oil priming after internal engine work - JMBT - 03-22-2020, RE: Oil priming after internal engine work - Nostalgic - 03-22-2020, RE: Oil priming after internal engine work - Chamberpains - 03-22-2020, RE: Oil priming after internal engine work - Nostalgic - 03-22-2020, RE: Oil priming after internal engine work - Lonestar10 - 03-22-2020, RE: Oil priming after internal engine work - Unilevers - 03-22-2020, RE: Oil priming after internal engine work - Waterloo - 03-23-2020, RE: Oil priming after internal engine work - Rawze - 03-23-2020, RE: Oil priming after internal engine work - JMBT - 03-23-2020, RE: Oil priming after internal engine work - JMBT - 03-23-2020, RE: Oil priming after internal engine work - Signature620 - 03-23-2020 |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.