| Oil change interval after internal work |
| 03-31-2020, (Subject: Oil change interval after internal work ) Post: #1 | |||
| |||
| Oil change interval after internal work Hey guys, I just finished doing rods and mains, piston cooling nozzles, and the oil pump. Today I did an overhead. I am going to put my old oil back in the motor because it only had 10,000 on it when I drained it. What is the shortest distance I should run before I can drain the oil?? Would 320 miles be sufficient , or do I have to run it longer?? 320 miles would be very convenient. Thanks User's Signature: Anti-seize EVERYTHING, Except injectors...Use Petroleum Jelly!!! | |||
| « Next Oldest | Next Newest » |
| Messages In This Thread |
Oil change interval after internal work - JMBT - 03-31-2020 RE: Oil change interval after internal work - tree98 - 03-31-2020, RE: Oil change interval after internal work - Rawze - 03-31-2020, RE: Oil change interval after internal work - JMBT - 03-31-2020, RE: Oil change interval after internal work - tree98 - 04-01-2020, RE: Oil change interval after internal work - JMBT - 04-01-2020, RE: Oil change interval after internal work - JMBT - 04-01-2020, RE: Oil change interval after internal work - Rawze - 04-02-2020, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.