Code 2215 low fuel pressure

[Brock]

Left is with the key on and just the priming transfer pump running and the right is when it kicks off, so it is making pressure.

Thanks Lonestar! I think the pressure regulators might be first on the agenda tomorrow.

I swapped the compucheck fittings but it made no difference. It makes more pressure with the priming pump running than it does when the engine is running.

2 regulators and a fuel pump might be on the menu tomorrow.

I also checked the fuel shutoff valve by removing and attaching the wire and I could hear it clicking. I was thinking if that was stuck shut, it would bypass at the 350psi regulator to the fuel tanks..... but then it shouldn't be running.... heck with zero pressure I dont think it should be running though either.