Increasing HorsePower -- What You Need To Know |
04-05-2020, (Subject: Increasing HorsePower -- What You Need To Know ) Post: #93 | |||
| |||
RE: Increasing HorsePower -- What You Need To Know (04-05-2020 )RHeller11 Wrote: ok, so there was an SCR TSB on the truck and part of that was updating the CPL from 3664 to 4780. Now I need to compare EB90237.8 to EB90222.08 to see if they are compatible. any suggestions? The TSB is 'tsb150105' and it shows what program it should be updated to. Program EB90021 is your original program for that engine according to its ser#. The TSB shows EB90237 and a new CPL of CPL4780. Your ECM information/program is correct assuming that you have the updated SCR canister. Might want to check/verify the part# on the SCR element to be sure. ------ As far as comparing EB90237 with EB90222 (looking at 16,484 parameters/settings in the program) ... Literally, the only thing different in the EB90222 program is the higher power/torque. Besides some mundane data-plate options that have no effect on engine, All else is the same. User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!. | |||
|
« Next Oldest | Next Newest » |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.