How to read coolant test strips

[Rawze]

here are instructions...
https://www.cumminsfiltration.com/sites/...T15626.pdf

according to the pic you posted, your moly (middle section) is at row 1.5~ish and your nitrate (bottom of strip in the pic) is somewhere between a and b. - This puts your reading at "Below Normal" and you need additives pretty badly.

For references ... My coolant tests usually end up with a mostly purple~ish result on that bottom row.

{Now back to my gin martini and olives while I watch the world fall apart around me.lol}