Oil leak behind engine?? Cm2250

[Waterloo]

Well, there is a gasket, o-ring type seal back there, I can't tell from the photo though. That bell housing has an oil feed line built into it internally from the motor to the oil pan through the block. If that gasket/seal fails, which normally happens after a clutch replacement and not doing replacing this seal at the same time... $2400 there about to fix... You have to pull the transmission, and you may as well do the rear main and roll some new bearings in at the same time and throw a clutch in, everything has to come apart... Just what I know from my friend that had this same leak after having a new clutch installed. And this is not something you can replace yourself... It is a real bitch, as the bell housing has to be inched in using a micrometer... No lie.

IF THAT IS WHAT IT IS.