CM 871 Burnt Valve

Rawze.com: Rawze's ISX Technical Discussion and more

New: Rawze's amazon Page

A big THANK YOU For those who have recently Contributed towards keeping the lights on around here. It helps keep the website costs at bay and goes towards helping others with their trucks.

I want to personally thank everyone who has donated to the forum recently. It helps pay for the $790/month internet bill that the forum consumes. - Thank you again.

YOU NEED AN INVITATION CODE TO Register! -- To obtain an invitation code, please e-mail [email protected] with a reason why you want to join. This keeps the spammers out and our forum clean.

Current time: 11-23-2024, | ShoutboxHello There, Guest! (Login — Register)

Threaded Mode | Linear Mode

CM 871 Burnt Valve

04-12-2020, (Subject: CM 871 Burnt Valve )

Post: #26

2dlb

Offline

Established (32 Likes)

Posts: 60
Joined: Oct 2019

Thanks: 163
Given 32 thank(s) in 18 post(s)

RE: CM 871 Burnt Valve

Happy Easter Everyone
Thanks for the suggestion Rawze. Morgan87 i was mistaken. When i looked at it last night i could have sworn and it felt like there was a nick. This morning following Rawzes suggestion i started with scotch brite enden up going 400 grit then 600 grit then scotch brite and finished of with fine crocus cloth. I'm feeling a lot better today. What ever it was still left a mark. Rawse im not sure about the thrust , If cyl 4 is at TDC then this mark on the 5th main is at 10 oclock and the rod journal for 5 is down at 4ish. I attached a picture of the mains that i have done so far.
Thanks Again.

Return to Top | find

« Next Oldest | Next Newest »

Messages In This Thread

CM 871 Burnt Valve - 2dlb - 03-31-2020,

RE: CM 871 Burnt Valve - Rawze - 03-31-2020,

RE: CM 871 Burnt Valve - 2dlb - 03-31-2020,

RE: CM 871 Burnt Valve - Lonestar10 - 03-31-2020,

RE: CM 871 Burnt Valve - 2dlb - 03-31-2020,

RE: CM 871 Burnt Valve - Rawze - 03-31-2020,

RE: CM 871 Burnt Valve - 2dlb - 04-02-2020,

RE: CM 871 Burnt Valve - 2dlb - 04-02-2020,

RE: CM 871 Burnt Valve - Rawze - 04-02-2020,

RE: CM 871 Burnt Valve - 2dlb - 04-05-2020,

RE: CM 871 Burnt Valve - 2dlb - 04-06-2020,

RE: CM 871 Burnt Valve - Rawze - 04-06-2020,

RE: CM 871 Burnt Valve - smorgan87 - 04-06-2020,

RE: CM 871 Burnt Valve - 2dlb - 04-07-2020,

RE: CM 871 Burnt Valve - smorgan87 - 04-07-2020,

RE: CM 871 Burnt Valve - hhow55 - 04-07-2020,

RE: CM 871 Burnt Valve - Signature620 - 04-08-2020,

RE: CM 871 Burnt Valve - 2dlb - 04-08-2020,

RE: CM 871 Burnt Valve - Rawze - 04-08-2020,

RE: CM 871 Burnt Valve - 2dlb - 04-11-2020,

RE: CM 871 Burnt Valve - Rawze - 04-11-2020,

RE: CM 871 Burnt Valve - 2dlb - 04-11-2020,

RE: CM 871 Burnt Valve - smorgan87 - 04-11-2020,

RE: CM 871 Burnt Valve - 2dlb - 04-12-2020,

RE: CM 871 Burnt Valve - Rawze - 04-12-2020,

RE: CM 871 Burnt Valve - 2dlb - 04-12-2020

RE: CM 871 Burnt Valve - Signature620 - 04-12-2020,

RE: CM 871 Burnt Valve - redbeard - 04-12-2020,

RE: CM 871 Burnt Valve - 2dlb - 04-12-2020,

NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.

Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication

Powered By MyBB, © 2002-2024 MyBB Group | Theme by Laughing Inc - Web Design