cm2250 swap to cm2350 |
04-15-2020, (Subject: cm2250 swap to cm2350 ) Post: #16 | |||
| |||
RE: cm2250 swap to cm2350 Not sure about other ppl's 2250's, but my cm2250 has 3 harnesses to the ECM. 2 from cummins and 1 oem. On the bright side, all the wiring schematics are available from the different harnesses so I'd say use the harness for the 2350 and only adjust the OEM harness if any pins are different. As cummins determines the pinout for all the harness connectors it shouldn't be too hard. User's Signature: "...And as we wind on down the road, Our Shadows taller than our Soul..." | |||
|
« Next Oldest | Next Newest » |
Messages In This Thread |
cm2250 swap to cm2350 - Breeze - 04-14-2020, RE: cm2250 swap to cm2350 - Unilevers - 04-14-2020, RE: cm2250 swap to cm2350 - Rawze - 04-14-2020, RE: cm2250 swap to cm2350 - Breeze - 04-14-2020, RE: cm2250 swap to cm2350 - Rawze - 04-14-2020, RE: cm2250 swap to cm2350 - Unilevers - 04-15-2020, RE: cm2250 swap to cm2350 - Breeze - 04-15-2020, RE: cm2250 swap to cm2350 - Breeze - 04-15-2020, RE: cm2250 swap to cm2350 - Rawze - 04-15-2020, RE: cm2250 swap to cm2350 - SquareOne - 04-15-2020, RE: cm2250 swap to cm2350 - Breeze - 04-15-2020, RE: cm2250 swap to cm2350 - Breeze - 04-15-2020, RE: cm2250 swap to cm2350 - SquareOne - 04-15-2020, RE: cm2250 swap to cm2350 - Unilevers - 04-15-2020, RE: cm2250 swap to cm2350 - Signature620 - 04-15-2020, RE: cm2250 swap to cm2350 - JimT - 04-15-2020 |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.