2013 isx

[Rawze]

(04-22-2020 )Wonderer Wrote:  I didnt want to drive 3 hrs in derate if i couldnt get it fixed.. im running low on money from down payment and repairs..i dont want to de mandate it but im running out of money..this is my first cummins and im learning about it and its systems..im new to all this and need some advise that how i found your fourm..jus trying to get my truck on the road before i go bankrupt .they could have jus told me to find someone else to help me and i wouldnt have wasted the last 5 days trying to get advise or help..thanks again

Sure you can try to get a hold of them ... but YOU WERE ALSO told what to do ...

YOUR NOT LISTENING TO THE ADVICE GIVEN!!!

--- INVEST IN THE PROPER TOOLS AND EQUIPMENT TO FIX IT YOURSELF AND STOP WASTING YOUR TIME AND MONEY!!!

ANYTHING LESS AND YOU CAN ONLY BLAME YOURSELF FOR NOT TAKING THE INITIATIVE IN THE FIRST PLACE -- WELCOME TO MODERN TRUCKING --- IF YOU DO NOT LEARN TO WORK ON IT YOURSELF THEN YOU ARE BETTER OFF BEING A COMPANY DRIVER! -- modern trucking with modernized equipment ==== modern ways of dealing with issues, BETTER EDUCATION to help you solve your problems and MAKE WISE CHOICES instead of blaming everything and everyone around you instead of shoving all your problems off onto everyone else!


--- YOU NEVER EVEN STATED WHAT YOUR ACTUAL PROBLEMS ARE EXCEPT TO SAY IN SO MANY WORDS --- "ITS BROKEN" --- NO FAULT CODES,.. NO ACTUAL ENGINE CONDITIONS .. NOTHING!!! -- WITHOUT THE PROPER TOOLS AND DIEG. SOFTWARE, AND WAYS OF TROUBLESHOOTING IT --- THERE WILL BE NO WAY FOR YOU TO HELP YOURSELF, NONETHELESS ANYONE ON HERE HELP YOU!

ALL YOU STATED SO DFAR IS HOW MANY PARTS THE IGNORANT STEALERS#$IT HAS THROWN AT TI BLINDLY LIKE A BUNCH OF FOOLS!-- THAT IS WHAT THEY DO -- THEY THROW EXPENSIVE PARTS AT IT AND HOPE YOUR ISSUES GO AWAY WHILE TURNING A BLIND EYE AT HOW MUCH MONEY OF YOURS THAT THEY WASTE --- THAT SEEM TO BE YOUR BIGGEST ISSUE OF ALL -- WASTING MONEY AT THE REPAIR SHOPS,. ESPECIALLY THE STEALERDS#ITS!!! -- AND I AM TRYING TO POINT IT OUT TO YOU BUT YOU ARE NOT LISTENING TO ME!!!!! --- INVEST IN YOURSELF AND YOUR TRUCKING BUSINESS -- YOU SHOULD HAVE DONE THIS THE DAY YOUR GOT THE TRUCK, IF NOT BEFORE HAND!!! -- IT IS ONLY YOUR OWN FAULT FOR NOT SETTING YOURSELF UP PROPERLY AND DOING SO!!!!!!


-- HOW MUCH YOU THINK THAT TRUCK WOULD BE DOWN IF I OWNED IT?--- -- I AM NOT UNIQUE, THERE ARE LIKELY 500 OTHER PEOPLE ON THIS FORUM ALONE THAT CAN SOLVE IT THEMSELVES ----- THAT IS HOW A MODERN SUCCESSFUL O/O TRUCKING BUSINESS WORKS!!!! --- LEARN TO WORK ON IT,.. GET THE RIGHT TOOLS FOR THE JOB ;; GET ON TOP OF IT AND GET WITH THE TIMES!!!--- THAT OR GO BACK TO BEING A COMPANY DRIVER IF YOU DON'T WANT TO LEARN HOW TO OWN A MODERN TRUCK!

Mattman already stated it ...
Get yourself an inlise-6 adapter off ebay or somewhere else on the cheap, a used windows7 laptop AND GO AT IT!!!! -- WE ARE HERE TO HELP IF YOU CAN GET TO WHAT YOUR ACTUAL PROBLEMS ARE!!! -- OTHERWISE NO ONE HERE IS GOING TO HELP YOU, AS NONE OF US HAVE E.S.P. OR OTHER MAGICAL FIX-IT POWERS!