CAT ET Software (and head problems) |
04-30-2020, (Subject: CAT ET Software (and head problems) ) Post: #5 | |||
| |||
RE: CAT ET Software Thanks. I made a plate for the intake and installed a pressure gauge and a schrader valve. I pressurized the intake up to 35 psi and I can hear air leaking. Sounds like cyl #5 air leaking the loudest. Pressure will leak down from 30 to 20 psi in about 10 seconds. Not sure how long it should hold pressure? I’m going to pull the injector and try pressuring the one cyl to see if I can pinpoint it. I’m guessing the new head I got was no good, that would be my luck. | |||
« Next Oldest | Next Newest » |
Messages In This Thread |
CAT ET Software (and head problems) - tsolson - 04-26-2020, RE: CAT ET Software - Rawze - 04-26-2020, RE: CAT ET Software - trucklogger2 - 04-27-2020, RE: CAT ET Software - Rawze - 04-27-2020, RE: CAT ET Software - tsolson - 04-30-2020 RE: CAT ET Software - Rawze - 05-01-2020, RE: CAT ET Software - tsolson - 05-01-2020, RE: CAT ET Software - tsolson - 05-03-2020, RE: CAT ET Software - tree98 - 05-03-2020, RE: CAT ET Software - tsolson - 05-03-2020, RE: CAT ET Software (and head problems) - tree98 - 05-04-2020, RE: CAT ET Software - Rawze - 05-04-2020, RE: CAT ET Software (and head problems) - Rawze - 05-04-2020, RE: CAT ET Software (and head problems) - tsolson - 05-06-2020, RE: CAT ET Software (and head problems) - Rawze - 05-06-2020, RE: CAT ET Software (and head problems) - tree98 - 05-06-2020, RE: CAT ET Software (and head problems) - tsolson - 05-07-2020, RE: CAT ET Software (and head problems) - tree98 - 05-07-2020, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.