CAT ET Software (and head problems)
05-06-2020, (Subject: CAT ET Software (and head problems) ) 
Post: #14
RE: CAT ET Software (and head problems)
took the head to a machine shop, they vacuum tested it, filled the head with solvent overnight, took the valves out to check the guides, and stems. everything in spec, no burnt valves, and everything sealing up perfectly they said. So i'm back to square one.
replyreply


Messages In This Thread
RE: CAT ET Software - Rawze - 04-26-2020,
RE: CAT ET Software - Rawze - 04-27-2020,
RE: CAT ET Software - tsolson - 04-30-2020,
RE: CAT ET Software - Rawze - 05-01-2020,
RE: CAT ET Software - tsolson - 05-01-2020,
RE: CAT ET Software - tsolson - 05-03-2020,
RE: CAT ET Software - tree98 - 05-03-2020,
RE: CAT ET Software - tsolson - 05-03-2020,
RE: CAT ET Software - Rawze - 05-04-2020,
RE: CAT ET Software (and head problems) - tsolson - 05-06-2020



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.