New Turbo & Actuator, 3 miles down , new camshaft??

[bookerjt]

To update we finally got the truck home when I removed the head I found that #4 intake valve had broke we then removed the pistons and found that there was one broken ring and three collapsed rings. The camshaft bearing were worn all the way to the copper. The mains and connecting rods were scored . The valve cam I shot . #4 injector has a broken tip #4 piston is bent at the ring groves we are doing a total rebuild
Can any one recommend a good place for parts

Thanks for all the everyone gave
I will update when the truck is back on the road

God bless and be safe