Compressor Inlet Temp sensor

[Rawze]

(05-10-2020 )rapidisimo Wrote:  So is port "B" in your pic the hose going to the fan clutch?

its hard to tell in the 1st picture, but everything points towards it being plumbed right. A photo showing both connections, and not just the one line on the left end going to the fan would reveal more.

-- Other problem I see though is the wire-nutz and the electrical tape. -- That is beyond unreliable as hell. -- Go get some proper connectors for that thing to keep the road-salt, corrosion, etc.. out of the wiring and so that it is not exposed.
https://amzn.to/2AbTvWx