Too much or just right?

[Billdozer2]

(07-26-2016 )snailexpress Wrote:  I'm confused. I see temp sensor is still on DPF. Was sensor plug melted or temperature wasn't high enough to melt plastic.

I could not remove the outlet temp sensor. It was seized. I broke the end off of it, the part with the connector on it, so I could put a socket on it. However, it just rounded it off. I'm going to work on it today. Probably going to have to drill it out. :too_sad:

(07-26-2016 )snailexpress Wrote:  Why carbon is black it should turn grey when it burns.

That's actually my bad. I'll have to fix my post. I used the incorrect pictures. That cleaning I did was the 1st cleaning, but, it was before I put it in the kiln. I thought I took pictures after it was in the kiln, but I guess not. I'll take some today.