2006 ISX CM870 High Pyro, surging under load
06-10-2020, (Subject: 2006 ISX CM870 High Pyro, surging under load ) 
Post: #5
RE: 2006 ISX CM870 High Pyro, surging under load
Took the actuator off, the lever moves perfectly smoothly in both directions. So i did not loosen the exhaust side clamp to change clocking. The actuator is new, and is operating smoothly. I am going to run the injector test again. After i ran the test last time, the truck did not want to start, like it was out of fuel.
replyreply


Messages In This Thread
RE: 2006 ISX CM870 High Pyro, surging under load - sickoftrucks - 06-10-2020



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.