Cam bearings

Rawze.com: Rawze's ISX Technical Discussion and more

New: Rawze's amazon Page

A big THANK YOU For those who have recently Contributed towards keeping the lights on around here. It helps keep the website costs at bay and goes towards helping others with their trucks.

I want to personally thank everyone who has donated to the forum recently. It helps pay for the $790/month internet bill that the forum consumes. - Thank you again.

YOU NEED AN INVITATION CODE TO Register! -- To obtain an invitation code, please e-mail [email protected] with a reason why you want to join. This keeps the spammers out and our forum clean.

Current time: 11-24-2024, | ShoutboxHello There, Guest! (Login — Register)

Threaded Mode | Linear Mode

Cam bearings

07-28-2016, (Subject: Cam bearings )

Post: #15

Vin

Offline

HMR-Contrinbuting V.I.P. (40 Likes)

Posts: 84
Joined: Apr 2016

Thanks: 46
Given 40 thank(s) in 15 post(s)

RE: Cam bearings

(07-28-2016 )jimeneztrans84 Wrote: Is there a way to prevent wear on cam bearings and cam lobes?

Yes, properly done Overhead Set adjustments every 200 - 250k miles will help.

Regular oil change interval based on your fuel consumption.

Bypass Oil filter if you have EGR putting soot back in the engine.

1/2 to 1 gallon of gear lube in the engine oil every oil change.

Increase oil pressure by shimming the oil pump pressure regulator.

Return to Top | find

« Next Oldest | Next Newest »

Messages In This Thread

Cam bearings - gatow900 - 07-27-2016,

RE: Cam bearings - Vin - 07-27-2016,

RE: Cam bearings - Rawze - 07-27-2016,

RE: Cam bearings - gatow900 - 07-27-2016,

RE: Cam bearings - Rawze - 07-27-2016,

RE: Cam bearings - gatow900 - 07-27-2016,

RE: Cam bearings - Wiseman - 07-28-2016,

RE: Cam bearings - simon999 - 07-28-2016,

RE: Cam bearings - Rawze - 07-28-2016,

RE: Cam bearings - jimeneztrans84 - 07-27-2016,

RE: Cam bearings - Wiseman - 07-28-2016,

RE: Cam bearings - snailexpress - 07-28-2016,

RE: Cam bearings - yamajason - 07-28-2016,

RE: Cam bearings - gatow900 - 07-28-2016,

RE: Cam bearings - jimeneztrans84 - 07-28-2016,

RE: Cam bearings - Vin - 07-28-2016

RE: Cam bearings - Wiseman - 07-28-2016,

RE: Cam bearings - jimeneztrans84 - 07-28-2016,

RE: Cam bearings - Wiseman - 07-28-2016,

RE: Cam bearings - yamajason - 07-28-2016,

RE: Cam bearings - Wiseman - 07-28-2016,

RE: Cam bearings - jimeneztrans84 - 07-28-2016,

RE: Cam bearings - overshot - 07-28-2016,

RE: Cam bearings - jimeneztrans84 - 07-28-2016,

RE: Cam bearings - overshot - 07-30-2016,

NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.

Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication

Powered By MyBB, © 2002-2024 MyBB Group | Theme by Laughing Inc - Web Design