Increasing HorsePower -- What You Need To Know
06-21-2020, (Subject: Increasing HorsePower -- What You Need To Know ) 
Post: #102
RE: Increasing HorsePower -- What You Need To Know
(06-21-2020 )Rawze Wrote:  
(06-20-2020 )thelastking Wrote:  I’ll be the one putting on the program, I was thinking using ECM code AB10525. Original was AB10417

The AB10417 ...
* Has smart-torque enabled.
* Fuelling rates are slightly more aggressive in this program compared to the AB10525.
* Has 1450 ft-lbs torque and a max HP of 437HP at 1600RPM. Power falls off both above and below this point. At 1200rpm, power is 331HP, and at 1900rpm, power is at 386HP.

The AB10525 ...
* Has smart-torque disabled.
* Fuelling rates are slightly less aggressive in this program compared to the AB10417.
* Has 1645 ft-lbs torque and a max HP of 500HP at 1700RPM. Power falls off both above and below this point. At 1200rpm, power is 376hp, and at 1900rpm, power is at 458HP.

Other than these differences, they are 100% compatible.

Thank you for the info, what’s the best program you would recommend for a dump truck with 13 speed transmission and 4.33 rears?
replyreply


Messages In This Thread
RE: Increasing HorsePower -- What You Need To Know - thelastking - 06-21-2020



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.